|
 |
 |
 |
|
 |
|
 |
|
|
Last Updated
03/31/2019
Sitemap
|
|||||||||
Detailed entries for one subject from the INDEX TO HOW TO DO IT INFORMATION. |
|||||||||
|
DEPTH GAUGE & HEIGHT GAUGE sa ROUTER BIT DEPTH SETTING x HEIGHT GAUGE x THICKNESS GAUGE xx MEASURING & MARKING Tip describes how to make a simple, fool-proof gauge to determine the depth of a bowl while still attached to a lathe chuck. Thickness gauge is made by cutting a long, narrow V-shaped slot in a piece of wood and marking the size of the gap. Tip: Make this hardwood gauge to adjust the height of your table saw blade. Tip: Depth-gauge idea when cutting a saw kerf with a handsaw. Tip: Use a tire tread depth gauge to measure depth of dado cuts, etc. How to make a depth gauge for holes and mortises from a bolt and two nuts. Oversize depth gauge, made of wood, is used to check the depth of bowls being turned on a lathe. Depth gauge made from a wooden spool and snug-fitting dowel. Tip: Use a tire-tread depth gauge as a shop depth gauge. It is less expensive than a micrometer gauge. Depth gauge is made from mahogany and has brass wear plates. Easy-to-make depth gauge uses a 12" wooden ruler and this sliding head. A one-handed depth gauge that is accurate to 1/64" is made entirely of metal. Adjustable set-up gauge constructed of walnut and brass is used to measure height, depth and distance. It incorporates an accurate steel ruler. Collector's edition depth gauge is made from walnut and brass. How to use a length of PVC pipe as a depth gauge when drilling holes with a spade bit. Four-in-one dowel gauge checks diameter and hole depth. Simple depth gauge for use when turning bowls and other wooden vessels that helps prevent cutting through the outside edge when removing the inside material. Tip on making a simple thickness gauge to quickly check the progress of thickness planing. Tip shows how to make a simple depth gauge for use when carving a relief. Height gauge is made from a dowel, block of wood, and piece of broken rule. Simple depth gauge is made from a dowel, bolt, wing nut, and piece of scrap wood. Drilling depth gauge attaches to the outside of a lathe tailstock. Adjustable depth gauge is made from steel rod and angle iron. Gauging exactly. How to fabricate several different styles of wooden gauges. Includes marking-gauge, pencil-gauge, cutting-gauge, grasshopper gauge, panel-gauge, beam compasses, depth gauge and more. Depth gauge is made from a length of hardwood and some simple hardware. Oversize depth gauge made from wood and dowel is useful for measuring large bowls. Tip: Use an automobile tire tread depth gauge as a general-purpose depth gauge to measure up to 1". How to make a four-way depth gauge. | |||||||||
Copyright © by Norman Lathrop Enterprises. All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, print photocopying, recording or otherwise) without the prior expressed permission of Norman Lathrop Enterprises, except as permitted by law. |
|||||||||