|
 |
 |
 |
|
 |
|
 |
|
|
Last Updated
03/31/2019
Sitemap
|
|||||||||
Detailed entries for one subject from the INDEX TO HOW TO DO IT INFORMATION. |
|||||||||
|
V BLOCK xx BAND SAW ACCESSORIES & JIGS xx DRILL PRESS ACCESSORIES & JIGS xx SAWHORSE & WORK SUPPORT Crosscut round stock on a band saw or table saw using this V-block jig with a guide strip to fit the miter gauge slot. Drill press jigs. (1) Table with tall fence is used for drilling holes in the edges of tall, narrow, thin stock. (2) Line-of-holes jig allows a row of holes to be drilled at precisely identical intervals. (3) Tilting V-block jig for drilling angled holes in round stock. Simple technique for making a V-block to support cylindrical shapes while drilling. Tip shows how to make a V-block to use when drilling holes in a cylindrical piece of wood. Modified V-block, built of wood, holds flageolet securely while working windways, channels and slots. V-cut support block securely grips and holds thin wood on edge while planing. Tip: Wooden V-block is used to clamp gemstone "coconuts", thundereggs, etc. when sawing them in half. V-block clamp from commercial hardware. Wooden V-block for your drill press. Tip: How to make a pair of steel V-blocks to use as holders, weights, etc. in your shop. V-block clamp can be made in various sizes and is used to clamp round or polygon shapes into the V-block groove when drilling, etc. Simple V-block guide for drilling through round stock. V-block drill jig is a better way to bore centered and perpendicular holes through round stock (3/8" to 2" diameter). A second base for your portable drill press stand accessory has a built-in V-clamp. Use it when drilling pipe. Also allows the entire drill press to be clamped onto a water pipe or other pipe into which you wish to drill. Do-it-all drill press jig. Part 2. Six more accessories. (1) Fence for drilling equally spaced holes, (2) shaper fence, (3) V blocks, (4) pattern sanding insert, (5) freehand shaping and (6) pattern-routing insert. Master drill-press jig. Part 1. The basic table, adjustable fence, hole-spacing guide, and a V-block. Magnetic V-block. Wooden block features two different sizes of V-shaped slots (large and small), anti-skid tape to keep work piece from slipping or turning in the V, magnets to hold the block to the drill press table, and provision for clamping the block to the table. Button V-block. A versatile work-holding device for machining small parts. Separate fixtures are provided for attaching the button to lathes or milling machines. Saddle V-block. A heavy cast iron base in a U-shape and fitted with hold down clamps and an indexing button block. A work piece clamped in this device can be easily taken on and off a milling machine and repositioned with great accuracy. Button keyhole V-block. Designed to securely grip and automatically center small-diameter rods for turning on a lathe. A second version is fitted with arms for gripping in the saddle V-block of a milling machine. Drill-press jigs just for dowels. V-block jigs are used to hold dowels steady for flat (side) drilling and upright (end) drilling. V-block jig for sawing dowels lengthwise on a band saw. How to make a V-block jig to drill evenly spaced holes in a dowel. V-clamp block for use on a drill press facilitates drilling a hole down the middle of an object (such as a dowel or tool handle). V-block for holding dowels when drilling, sanding, cutting, etc. Tips on drilling holes in cylindrical stock looks at three holding jigs (V-groove, adjustable V-groove, core-box block) and bit selection. Shop-made V-block is attached to the bottom of a drill-press tilt table. V-block drilling guide for drilling chair legs and other round stock. The guide includes a built-in clamp to hold the stock securely. Tip: Make a special angled V-block for mortising angled holes in the legs and rails of chairs. Long wooden V-block for cutting dowels, drilling holes in round stock, etc. Exploit your drill press. Part 2. Drilling cylindrical stock. Several uses of a V-block to support the work piece at various angles are shown. Tip on making and using a V-block while boring a hole in the end of round stock. Easy-to-make V-block jig for drilling centered holes in the side of round stock. Drill press V-block is conveniently mounted on the underside of a rotating drill press table. Two handy jigs for dowels. (1) Adjustable V-block jig for accurately drilling holes into the side of a round object. (2) Step jig for accurately cutting dowels to the same length. Band saw V-block fixture speeds preparation of turning blocks. V-block drilling jig for boring holes through the sides of round stock. | |||||||||
Copyright © by Norman Lathrop Enterprises. All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, print photocopying, recording or otherwise) without the prior expressed permission of Norman Lathrop Enterprises, except as permitted by law. |
|||||||||