LOUDSPEAKER MOUNTING
xx LOUDSPEAKER
Back to the wall. Ideas on wall-mounting of loudspeakers and audio components. AUDIO AMATEUR 1/1974 [Oct 1974] (v.5#1) pg. 16
Tip on using brass automotive engine-block freeze plugs as expensive-looking feet for loudspeakers, audio equipment, furniture, etc. AUDIO ELECTRONICS 1/1997 [Feb 1997] (v.28#1) pg. 40
Higher fidelilty. Improve the sound from floor speakers by adding a tilted base which directs the sound upward rather than straight across the floor. CANADIAN HOME WORKSHOP Sep 2002 (v.25#10) pg. 56
How to improve the sound coming from stereo speakers by setting them on cork-lined stands. MECHANIX ILLUSTRATED #678 Oct 1984 (v.80) pg. 144
Simple "T"-shaped stand to support a loudspeakers against a wall. SPEAKER BUILDER 1/1980 [Feb 1980] (v.1#1) pg. 35
Tip on using closed cell foam kickboards for speaker/floor isolation and blackboard eraser felt for diffraction control. SPEAKER BUILDER 1/1981 [Mar 1981] (v.2#1) pg. 26
Sand stands. How to construct rigid, damped pedestal-style speaker stands where the pedestal is filled with sand. SPEAKER BUILDER 1/1986 [Apr 1986] (v.7#1) pg. 18
Tip on using threaded spikes and threaded inserts to add "spiked" feet to loudspeaker enclosures. SPEAKER BUILDER 1/1986 [Apr 1986] (v.7#1) pg. 38
Make your own speaker spikes from T-nuts and threaded rod. SPEAKER BUILDER 2/1987 [May 1987] (v.8#2) pg. 60
Basic speaker stands. How to determine the correct height and build simple wooden stands to raise speakers above floor level. SPEAKER BUILDER 3/1987 [Aug 1987] (v.8#3) pg. 28
Loudspeaker tune up. Tips on wiring, crossover, speaker stand, etc. SPEAKER BUILDER 2/1988 [Apr 1988] (v.9#2) pg. 29
Tip on improving the contact between loudspeaker spikes (feet) and the floor underneath a carpet. Tip on adding weight to loudspeaker bases to improve rigidity. SPEAKER BUILDER 3/1988 [May 1988] (v.9#3) pg. 47
Simple speaker stand for a carpeted room is made from birch plywood equipped with four spiked feet made from carriage bolts. SPEAKER BUILDER 1/1989 [Jan 1989] (v.10#1) pg. 50
Home-built spikes (feet) are made from steel plate, machine screws, bolts and nuts. They do not require any attachment to the loudspeaker enclosure. SPEAKER BUILDER 2/1989 [Mar 1989] (v.10#2) pg. 44
Simple mounting device secures a smaller speaker to the top of a larger bass cabinet to prevent the top speaker from being knocked off. SPEAKER BUILDER 4/1989 [Jul 1989] (v.10#4) pg. 58
Providing a firm foundation for the spiked feet on loudspeaker stands which are used in carpeted rooms. SPEAKER BUILDER 2/1990 [Apr 1990] (v.11#2) pg. 51
Tips on using cone-shaped "tiptoes" to support loudspeaker enclosures, especially on carpeting. SPEAKER BUILDER 5/1990 [Sep 1990] (v.11#5) pg. 77
How to convert ordinary closet bolts into speaker spikes. SPEAKER BUILDER 3/1991 [Jun 1991] (v.12#3) pg. 68
Inexpensive, rigid, and low mass loudspeaker stands are built from hollow columns and threaded steel rods. SPEAKER BUILDER 5/1991 [Oct 1991] (v.12#5) pg. 60
Stable satellite swivels. How to securely mount satellite speakers on top of a floor-standing bass module, but still allow them to be pivoted. SPEAKER BUILDER 2/1992 [Apr 1992] (v.13#2) pg. 14
Correction SPEAKER BUILDER 4/1992 [Jul 1992] (v.13#4) pg. 72
Spiked speaker foot tips. (1) Make from a screw thread insert and matching bolt. (2) Use a snowmobile spike. SPEAKER BUILDER 2/1992 [Apr 1992] (v.13#2) pg. 34
Building a high-performance loudspeaker stand. The main support is a 2" iron pipe filled with sand. SPEAKER BUILDER 4/1992 [Jul 1992] (v.13#4) pg. 50
Four-poster speaker stands. Simple stand for a "bookshelf" loudspeaker consists of one, two, three or four PVC legs filled with sand and attached to a base and top using long threaded rods. SPEAKER BUILDER 5/1995 [Jul 1995] (v.16#5) pg. 24
Satellite speaker stands. Vertically-adjustable floor stand for holding small loudspeakers consists of a base, pole, and adjustable platform (clamp) for holding the speaker. SPEAKER BUILDER 1/1996 [Feb 1996] (v.17#1) pg. 38
Stands for larger speakers are made from large cardboard tubes capped with wood and filled with sand. SPEAKER BUILDER 2/1996 [Apr 1996] (v.17#2) pg. 34
Tips on making loudspeaker spikes to penetrate carpeting and raise enclosure above the surface. SPEAKER BUILDER 1/1997 [Feb 1997] (v.18#1) pg. 53
Improving the sound from an audio system. (1) Delivering good clean AC power. (2) Using speaker stands. (3) Installing good speaker cables. SPEAKER BUILDER 5/1999 [Aug 1999] (v.20#5) pg. 60
|