Detailed entries for one subject from the INDEX TO HOW TO DO IT INFORMATION.
Click on a see also (sa) or tracing (xx) to view detailed entries about a related subject.
The entries are in alphabetical order by magazine name and then in chronological sequence.
To obtain a copy of any magazine article contact your local public library or the publisher.

Controlling R/C model servos using a computer's serial port. Interface circuit utilizes the ITC232-A serial-to-parallel interface chip. Est. cost: $95 (kit).
ELECTRONICS NOW Aug 1999 (v.70#8) pg. 71
Added Info ELECTRONICS NOW Nov 1999 (v.70#11) pg. 2

Tip on avoiding elevator servo failure by attaching two servos with one pushrod.
MODEL AVIATION Oct 1992 (v.18#10) pg. 58

How to calibrate an R/C servo tester.
MODEL AVIATION Jul 1994 (v.20#7) pg. 69

Tip on eliminating RFI interference when extending the length of servo leads.
MODEL AVIATION Apr 1995 (v.21#4) pg. 60

GOSLOW. A simple, compact and inexpensive circuit is inserted between R/C receiver and a control servo. It regulates the time required for full servo rotation between 2 and 20 seconds without any reduction in the servo's torque. Use for realistic deployment of flaps or landing gear. Est. cost: $20 (kit).
MODEL AVIATION Mar 1996 (v.22#3) pg. 44

Pushrods and keepers. Advice on acceptable R/C pushrod construction, pushrod guides, fuselage exit options, etc.
MODEL AVIATION Sep 1996 (v.22#9) pg. 60

How to install individual aileron servos.
MODEL AVIATION Oct 1996 (v.22#10) pg. 68

Servo reverser circuit the size of a postage stamp reverses the direction of travel of a proportional servo. Built from commonly available electronic components. Est. cost: $15 (kit).
MODEL AVIATION May 1997 (v.23#5) pg. 30

Servo Cycler. Build a test device that automatically cycles servos throughout their range of motion in a very controlled manner in order to reveal most servo or installation anomalies.
MODEL AVIATION Sep 1998 (v.24#9) pg. 34

How to modify a servo to increase arm rotation from 90-degrees (total) up to 180-degrees.
MODEL AVIATION Nov 1998 (v.24#11) pg. 50

Airborne auxiliary DC motors. How to modify a servo to allow 360-degree, bidirectional, variable-speed operation.
MODEL AVIATION Sep 1999 (v.25#9) pg. 100
Added Info MODEL AVIATION Oct 1999 (v.25#10) pg. 92 (Wiring diagram)

Deluxe R/C servo tester. Build a simple servo pulse generator that is compatible with a digital proportional radio control outfit.
MODEL BOATS #519 May 1994 (v.44) pg. 20

Do-it-yourself electronics. A beginner's guide to building electronic kits of R/C accessories. Part 2. Building the "Off Air" servo driver kit.
MODEL BOATS #539 Jan 1996 (v.46) pg. 30

Servopos. Electronic circuit for a predetermined servo positioner. When connected between the RC receiver and a servo, this device outputs only one of two possible position command pulses depending upon the input signal bandwidth. Suitable for applications which require a fixed servo travel (opening or closing a valve, releasing a tow hook, etc.).
MODEL BOATS #553 Mar 1997 (v.47) pg. 34

Technique for mounting aileron servos in foam wings using carbon fibre.
RADIO CONTROL MODELS & ELECTRONICS Jul 1993 (v.36#7) pg. 18

Tip on incorporating electrical conduit for servo wiring when constructing model aircraft wings.
RADIO CONTROL MODELS & ELECTRONICS Jul 1993 (v.36#7) pg. 19

Fitting a ball bearing to the final output gear of the standard JR NES-507 servo.
RADIO CONTROL MODELS & ELECTRONICS Nov 1993 (v.36#11) pg. 24

Easy method of producing servo lead tunnels in foam wings without cutting into the veneer or adding weight.
RADIO CONTROL MODELS & ELECTRONICS Dec 1993 (v.36#12) pg. 66

How to wire up servo extension leads.
RADIO CONTROL MODELS & ELECTRONICS Dec 1994 (v.37#12) pg. 14

Folding 3mm rigid PVC sheet after softening with a heat gun. Includes a tip on making a channel-shape for mounting servos.
RADIO CONTROL MODELS & ELECTRONICS Jan 1995 (v.38#1) pg. 33

How to keep your servos in place by constructing a sturdy mounting cradle from wood.
RADIO CONTROL MODELS & ELECTRONICS May 1995 (v.38#5) pg. 22

Copyright © by Norman Lathrop Enterprises. All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, print photocopying, recording or otherwise) without the prior expressed permission of Norman Lathrop Enterprises, except as permitted by law.