Norman Lathrop Enterprises | Norman Lathrop Enterprises
Index To How To Do It Information
Lathrop Report On Newspaper Indexes
A profile of Norman Lathrop Enterprises
Last Updated
  Index Home  |   A-Z Subject Heading Guide    |   Keyword Search  |   Union List 

Detailed entries for one subject from the INDEX TO HOW TO DO IT INFORMATION.
Click on a see also (sa) or tracing (xx) to view detailed entries about a related subject.
The entries are in alphabetical order by magazine name and then in chronological sequence.
To obtain a copy of any magazine article contact your local public library or the publisher.

xx   BOX

Wooden jewelry box features dovetailed corners, a sliding, removable upper tray, and a frame-and-panel top. Overall dimensions: 14"x8"x4" tall.
AMERICAN WOODWORKER #17 Nov-Dec 1990 pg. 56

Kerf-bent jewelry box. Ingenious notches and some steam let you fold wood.
AMERICAN WOODWORKER #52 Jun 1996 pg. 31

Emperor jewelry chest. Simple joinery and spectacular contrasting woods are combined in this four-drawer chest. Overall dimensions: 8" tall, 15" wide, 9" deep.
AMERICAN WOODWORKER #54 Oct 1996 pg. 65

Small jewelry box (5"x13"x 5" high) has a lid split into two sections and hinged at opposite ends. Splined butt joints hold front and back of the box to the sides. Twin lids pivot on brass pins.
AMERICAN WOODWORKER #61 Oct 1997 pg. 72

Satinwood lidded box with suede-lined inset tray. Box is veneered with Ceylon satinwood with an band of holly inlay bordering the top. Feet are turned from tagua nuts.
AMERICAN WOODWORKER #64 Feb 1998 pg. 56

Classic mahogany jewelry box with a lift top and bracket feet. Features elegant, custom molding profiles cut using three basic router bits. Overall dimensions: 18"x12"x6" high.
AMERICAN WOODWORKER #93 Apr 2002 pg. 80

Jewel box is made from a large tuna can, cardboard, doweling, a wooden drapery ring and felt.
BETTER HOMES & GARDENS Dec 1972 (v.50#12) pg. 71

How to build a wall-mounted jewelry rack for hanging chains and necklaces. Rack is 18" high, 12" wide and 2" deep with a shelf across the bottom and six L hooks across the top.
BETTER HOMES & GARDENS Oct 1977 (v.55#10) pg. 264

Tip: How to make a jewelry box from a book. Estimated cost: $6.
BETTER HOMES & GARDENS Jul 1981 (v.59#7) pg. 76

Picture perfect. Store-bought molding makes this jewelry box quick to build. The removable top features a glass panel for viewing the contents. Overall dimensions: 10"x8"x2" deep.
CANADIAN HOME WORKSHOP Nov 2002 (v.26#2) pg. 32

Trinket box (jewelry box) features a single drawer which pulls out. Built of oak, maple or other hardwood. Dimensions (metric): 360mm wide, 190mm deep, 98mm tall. Est. cost: $10.
CANADIAN WORKSHOP Dec 1979 (v.3#3) pg. 61
Correction CANADIAN WORKSHOP Feb 1981 (v.4#5) pg. 5

Hexagon shape trinket (jewel) box is 6" across.
CANADIAN WORKSHOP Nov 1985 (v.9#2) pg. 65
Added Info CANADIAN WORKSHOP Dec 1985 (v.9#3) pg. 65

Fruitwood jewelry chest. Features four small drawers (1"x2"x4") and a cabinet area (4"x8"x4"). Overall dimensions of case: 10" tall, 8" wide, 4" deep.
CANADIAN WORKSHOP May 1987 (v.10#8) pg. 47

Four-drawer trinket box is made to look like it has 12 small individual drawers, each equipped with a white porcelain knob. Overall dimensions: 15" tall, 6" deep, 15" wide.
CANADIAN WORKSHOP Sep 1987 (v.10#12) pg. 52

Heirlooms and treasures jewel box. Wooden box features dovetailed corners, lift top, oak and walnut construction. Overall dimensions: 13"x9"x4" deep.
CANADIAN WORKSHOP Nov 1989 (v.13#2) pg. 49

Irregular-shape four-sided wooden jewelry box features a lid that pops up at the touch of a finger.
CANADIAN WORKSHOP Dec 1990 (v.14#3) pg. 51

A box for Jackie. Tips on adapting and personalizing a pattern for chip carving on a basswood jewelry box. Includes carving tips.
CHIP CHATS Sep-Oct 2000 (v.47#5) pg. 96

Tiffany's trinkets. Padded fabric-covered "cottage" jewelry box for a child opens up to reveal a 15-drawer plastic storage cabinet.
CRAFTS Feb 1995 (v.18#2) pg. 76, 49

Ribbons and flowers jewelry box. Purchased cardboard heart-shaped jewelry box is covered with floral print fabric and decorated with Battenberg doilies, ribbon and a square of Aida cloth decorated with floral ribbon embroidery.
CRAFTS Mar 1997 (v.20#3) pg. 36, 49

Small wooden jewelry box has a circular insert of needlepoint.
DECORATING & CRAFT IDEAS Jun 1978 (v.9#5) pg. 60, 72

Embroidery jewelry tray and matching picture frame.
DECORATING & CRAFT IDEAS Sep 1979 (v.10#7) pg. 90

Elegant treasure boxes. Background is gold leaf with a repousse (raised design). Can also be used for necklaces.
DECORATING & CRAFT IDEAS Jan-Feb 1980 (v.11#1) pg. 82

Three projects to do with roses. (1) Soft-sculpture jewelry box. (2) Rose petal beads. (3) Rose motif quilt.
DECORATING & CRAFT IDEAS Jun 1981 (v.12#5) pg. 40

More Christmas bazaar crafts. (1) Shell ornaments. (2) Chenille fan trees. (3) Looped trinket boxes.
DECORATING & CRAFT IDEAS Nov 1981 (v.12#9) pg. 38

Four jiffy Christmas gifts. (1) Footie sock animals. (2) Jewelry jars. (3) Rattan towel holder. (4) Macrame and feather hatbands.
DECORATING & CRAFT IDEAS Dec 1981 (v.12#10) pg. 23

Purchased wooden jewelry box is painted with a dogwood blossom motif against a background. Sides and edges have a marbleized finish.
DECORATIVE ARTIST'S WORKBOOK May-Jun 1996 (v.23#3) pg. 46, 37

Making a miniature Chippendale chest for use as a jewelry box. 4-drawer chest of drawers measures 6" tall, 6" wide and 3" deep.
EARLY AMERICAN LIFE Dec 1981 (v.12#6) pg. 30

Man's jewelry box with tray insert.
FAMILY CIRCLE Oct 23 1978 (v.91#12) pg. 123, 181

Drawstring jewelry pouches.
FAMILY CIRCLE Nov 18 1980 (v.93#16) pg. 122, 162

Man's accessory box has one drawer and a lift-up top. Dimensions: 10"x12"x15". Built from 1/2" plywood.
FAMILY CIRCLE Nov 3 1981 (v.94#15) pg. 101, 165

Marble-look jewelry box is made by covering a wooden box with marbleized paper. Est. cost: $11.
FAMILY CIRCLE Oct 26 1982 (v.95#15) pg. 96

Miniature chest jewel box.
FAMILY HANDYMAN #83 Dec 1964 (v.14#6) pg. 44

Wooden boxes, with heart shape and removable tops, are suitable to hold jewelry, candy, etc.
FAMILY HANDYMAN #226 Feb 1982 (v.32#2) pg. 32

Wooden jewelry boxes begin as thick pieces of wood. Various shapes are band sawed out of the middle and then hollowed out to produce storage drawers.
FAMILY HANDYMAN #234 Dec 1982 (v.32#10) pg. 59

Wooden jewelry box is made from oak and features a removable tray.
FAMILY HANDYMAN #244 Dec 1983 (v.33#10) pg. 67, 74

Trout-shaped jewelry box with lid that pivots open appears to be carved but is really made on a band saw.
FAMILY HANDYMAN #343 Nov-Dec 1993 (v.43#10) pg. 76

Chest lid stop consists of a chain that stores in a hole in the edge of the box when top is closed.
FINE WOODWORKING #31 Nov-Dec 1981 pg. 20

Quick and tricky little boxes. How to bookmatch scrap wood into gifts.
FINE WOODWORKING #43 Nov-Dec 1983 pg. 32
Added Info FINE WOODWORKING #45 Mar-Apr 1984 pg. 4

How to convert solid-brass leaf hinges into "stop hinges" for jewelry boxes.
FINE WOODWORKING #47 Jul-Aug 1984 pg. 8

Line the bottom of jewelry box drawer with velvet. Attach the velvet to the bottom before assembly.
FINE WOODWORKING #67 Nov-Dec 1987 pg. 8
Added Info FINE WOODWORKING #73 Nov-Dec 1988 pg. 8

Trick tambour-top jewelry box. Pulling the drawer open causes the tambour top to automatically open.
FINE WOODWORKING #75 Mar-Apr 1989 pg. 56

Technique for getting straight "stepped edges" on small jewelry boxes uses a narrow-belt sander and a simple jig.
FINE WOODWORKING #83 Jul-Aug 1990 pg. 18

A beginner's jewelry box. The curved sides are glued-up strips of ranch casing which is covered with shop made veneer that is steam-bent over a tea kettle. Overall dimensions: 13"x9"x3" deep.
FINE WOODWORKING #90 Sep-Oct 1991 pg. 52

Making a curved-face wooden box. Jig-guided router is used to shape the curved sides. Construction of a jewelry box with a framed, vaulted lid and curved sides is shown.
FINE WOODWORKING #107 Jul-Aug 1994 pg. 82

The handbook of flat lapping. Part 8. Make a jewelry box in the style of a "packing crate" out of flat pieces of decorative rock
GEMS & MINERALS #489 Jul 1978 pg. 26

Floral chintz travel accessories to make include an all-purpose tote, shoe bags, a jewelry case, a hair-dryer bag, and padded hanger.
GOOD HOUSEKEEPING Nov 1980 (v.191#5) pg. 165, 296

Making jewel and trinket boxes from slabs of rock.
LAPIDARY JOURNAL Sep 1981 (v.35#6) pg. 1258

Suede-covered accessories for a man. (1) Trunk (20"x12"x15") with lift out tray is trimmed with gold tacks. (2) Jewelry box with padded top. (3) An 11"x13" picture frame. (4) Desk blotter and matching folder with decorative buckle.
McCALLS NEEDLEWORK & CRAFTS Spring 1980 (v.25#1) pg. 120, 171

Padded jewelry box, 6"x7"x2", has a lid that is edged with lace and inset with a beaded butterfly panel.
McCALLS NEEDLEWORK & CRAFTS Apr 1986 (v.31#2) pg. 53, 86

Two-drawer jewelry chest, 6"x5"x8", is made from matboard and covered with gift wrap.
McCALLS NEEDLEWORK & CRAFTS Feb 1987 (v.32#1) pg. 79

Satin jewelry roll, accented by ribbon embroidery, is padded and has two inside pockets.
McCALLS NEEDLEWORK & CRAFTS Feb 1987 (v.32#1) pg. 85, 94

Rectangular fabric jewelry pouch fastens with ties at two corners. The flap is edged with lace across the bottom and cross-stitched with a tea-rose motif and the motto "May you be showered with Happiness."
McCALLS NEEDLEWORK & CRAFTS Feb 1989 (v.34#1) pg. 61, 85

Tip: Re-cover an old jewelry box with grasscloth.
McCALLS NEEDLEWORK & CRAFTS Dec 1989 (v.34#6) pg. 58, 85

A four-drawer wooden chest.
MECHANIX ILLUSTRATED #423 Aug 1963 (v.59) pg. 96

Jewelry chest with built-in mirror.
MECHANIX ILLUSTRATED #485 Oct 1968 (v.64) pg. 74

Elegant mahogany jewelry chest is 14" long, 6" deep and 7" high. Six drawers are located behind the four front doors.
MECHANIX ILLUSTRATED #519 Aug 1971 (v.67) pg. 100

Build several styles of elegant jewel boxes including dresser-top box, dual-wood box, stained-glass box, faux marble box and parquet box.
MECHANIX ILLUSTRATED #633 Feb 1981 (v.77) pg. 80

Jewelry box made of wood features a needlepoint panel on the top.
MECHANIX ILLUSTRATED #658 Mar 1983 (v.79) pg. 59

Jewelry travel case made from cloth.
NEEDLECRAFT FOR TODAY Jul-Aug 1981 (v.4#4) pg. 18

Make a shell trapunto insert for a jewelry box top.
NEEDLECRAFT FOR TODAY May-Jun 1984 (v.7#3) pg. 15, 27, 45

Beaded inset for the top of a wooden jewelry box and matching back for a hand-held mirror are worked in counted cross-stitch.
NEEDLECRAFT FOR TODAY Jan-Feb 1986 (v.9#1) pg. 11, 24, 42

Jewelry chest covered with Marlite textured leather hardboard.
POPULAR MECHANICS Oct 1967 (v.128#4) pg. 150

Jewelry box features a roll-top desk styling, including the roll top.
POPULAR MECHANICS Feb 1968 (v.129#2) pg. 159

Two jewelry boxes, one traditional and one modern.
POPULAR MECHANICS Jul 1968 (v.130#1) pg. 134

Jewelry keeper is a hardwood "tree" for earrings mounted at the back of a hollowed out tray.
POPULAR MECHANICS Feb 1971 (v.135#2) pg. 132

Jewelry box has two drawers and a recessed area beneath the lid that contains a music box. Veneer is of rare woods.
POPULAR MECHANICS Jul 1971 (v.136#1) pg. 124

A small wooden "treasure chest" with brass trim stores trinkets.
POPULAR MECHANICS Dec 1975 (v.144#6) pg. 97

Dresser-top valet has two drawers for jewelry and depressions in the top to hold watch, keys, change, etc.
POPULAR MECHANICS Dec 1975 (v.144#6) pg. 97

Making a decorative jewelry box is included in article on veneering techniques.
POPULAR MECHANICS May 1977 (v.147#5) pg. 110

Jewelry box for a young girl features four wooden drawers set into an acrylic case.
POPULAR MECHANICS Nov 1977 (v.148#5) pg. 132

Four Valentine gifts. (1) Heart shaped tilting mirror. (2) Heart-shaped jewelry box. (3) Heart-shaped crayon holder. (4) Ring caddy shaped like a hand. Put rings on "fingers".
POPULAR MECHANICS Feb 1980 (v.153#2) pg. 124

Miniature chest of drawers is a copy of one made at the turn of the century. Features three drawers and a tilting mirror. Chest dimensions: 11"x9"x5". Suitable for use as a jewelry box, doll furniture, etc.
POPULAR MECHANICS Mar 1986 (v.163#3) pg. 160

Pop-up tray jewelry box.
POPULAR SCIENCE Feb 1964 (v.184#2) pg. 157

Necklace and earring rack mounts on inside of closet door.
POPULAR SCIENCE Sep 1969 (v.195#3) pg. 66

Jewelry chest (14"Tx11"Wx8"D) features six small drawers, five of which are concealed behind a pair of frame-and-panel doors.
POPULAR WOODWORKING #41 Feb-Mar 1988 (v.7#5) pg. 26

Bee hive jewelry box. Turned wooden box is shaped like a small beehive. It comes apart into four pieces. Overall dimensions: 7" tall, 6" diameter.
POPULAR WOODWORKING #55 Jul 1990 (v.10#1) pg. 58

Burl oak jewelry chest (14"x9"x6" tall) features framed oak burl panels, removable tray, and velvet lining.
POPULAR WOODWORKING #68 Sep 1992 (v.12#2) pg. 34

Jewelry box made from pieces of paint grade crown molding and baseboard. Overall dimensions: 16"x9"x7" high.
POPULAR WOODWORKING #72 May 1993 (v.12#6) pg. 34, Insert

Wooden jewelry box uses common crown molding for the sides and scrap wood for the top and bottom. Overall dimensions: 12"x7"x3" tall.
POPULAR WOODWORKING #80 Sep 1994 (v.14#2) pg. 38

Jewelry armoire with art deco styling (14"x7"x15" high). Features six drawers and hinged compartments on each side with hooks for hanging necklaces.
POPULAR WOODWORKING #94 Jan 1997 (v.16#6) pg. 50

Jewelry box designed using the starkly utilitarian and well-proportioned design principles of the famous Bauhaus architect Ludwig Mies van der Rohe (1886-1969). Shaped like a modern office building, it actually conceals five divided drawers.
POPULAR WOODWORKING #109 Jul 1999 (v.19#3) pg. 45, Insert

Wooden jewelry holder, with two doors that open to the sides, has posts to hold necklaces and panels on each door to hold pierced earrings. Box is painted with a traditional rosemaling design in scrolls and florals. Intermediate skill level.
TOLE WORLD #113 Nov-Dec 1991 (v.15#6) pg. 50, Insert

A gem of a keepsake box. Wooden box (8"x10"x3") features a rose pattern that is sculpted in padauk using power tools.
WEEKEND WOODWORKING (PROJECTS) #2 Mar 1988 (v.1#2) pg. 4

Small contoured keepsake box (jewelry box) is made from scrap wood. Overall dimensions: 5"x5"x2".
WEEKEND WOODWORKING (PROJECTS) #15 May 1990 (v.3#3) pg. 6

Jewelry case features a lift-top and two large drawers. The front is styled like a 9-drawer apothecary chest. Overall dimensions: 17"x8"x9" tall.
WEEKEND WOODWORKING (PROJECTS) #22 Jul 1991 (v.4#4) pg. 24

Showstopping jewelry showcase. Dresser-top cabinet (miniature armoire) with frame-and-panel doors features a swing-out rack for storing earrings and a special rack for storing necklaces. Overall dimensions: 7"x13"x17" tall.
WEEKEND WOODWORKING (PROJECTS) #30 Nov 1992 (v.5#6) pg. 20

Unique band sawn jewelry box in the shape of a crescent moon. Removing a star-shaped "key" allows the lid to slide open for access to two inner compartments.
WEEKEND WOODWORKING (PROJECTS) #38 Mar 1994 (v.7#2) pg. 10

Dressing table mirror frame (12"x9") serves as the door for a jewelry case. Opening the door reveals an earring rack, hooks for necklaces and compartments for rings. A scroll sawn rose motif decorates the top of the mirror. Overall dimensions: 13" tall, 9" wide, 4" deep.
WEEKEND WOODWORKING (PROJECTS) #42 Nov 1994 (v.7#6) pg. 7, Insert

Sand-and-surf jewelry box. Small wooden box (8"x5"x4") features a wooden seashell motif attached to the removable top.
WEEKEND WOODWORKING (PROJECTS) #47 Sep 1995 (v.8#5) pg. 12, Insert

Dovetailed jewelry box. A birdseye maple box (5"x10"x4") with a hinged top is decorated by adding walnut dovetail keys to the corners.
WEEKEND WOODWORKING (PROJECTS) #48 Nov 1995 (v.8#6) pg. 26, Insert

Heart-shaped jewelry holder is cut from plywood and has hooks for hanging necklaces.
WOMAN'S DAY Sep 1 1978 (v.41#14) pg. 94, 158

How to make antiques. Includes directions for a stained pine coatrack, vanity shelf, and jewelry box.
WOMAN'S DAY May 22 1984 (v.47#10) pg. 106, 184

Decorative wooden box is made from padauk. Overall dimensions: 5"x7"x2"deep.
WOOD MAGAZINE #2 Nov-Dec 1984 (v.1#2) pg. 84

Three-drawer jewelry box is made from beautiful West African zebrawood. Overall dimensions: 6"x7"x10".
WOOD MAGAZINE #9 Feb 1986 (v.3#1) pg. 70

Jewelry case features a glass-enclosed display carousel to keep hanging necklaces tangle-free and within easy reach. Also includes 4 drawers with routed pulls and handles of bird's-eye maple. Overall dimensions: 11" tall, 11" wide, 6" deep.
WOOD MAGAZINE #13 Oct 1986 (v.3#5) pg. 68

Jewel case features simple Scandanavian styling, two removable divided trays and decorative splines at the corners. Overall dimensions: 11"x9"x4" deep.
WOOD MAGAZINE #39 Dec 1990 (v.7#7) pg. 42

Heart-shaped jewelry box features a music box movement that is visible through a glass window.
WOOD MAGAZINE #43 Jun 1991 (v.8#4) pg. 33

Curved jewelry box, cut with a band saw, has three teardrop-shaped (whale shaped) drawers.
WOOD MAGAZINE #55 Oct 1992 (v.9#7) pg. 58

Jewelry box (7" diameter) has a lid and trays that rotate open. Painted wooden heart accents the top.
WOOD MAGAZINE #66 Dec 1993 (v.10#9) pg. 46

Dresser-top delight. Jewelry case is a chest with twelve roomy drawers. The mitered drawers are decorated with corner keys in a contrasting wood. Overall dimensions: 14"x14"x8" deep.
WOOD MAGAZINE #75 Dec 1994 (v.11#9) pg. 56
Correction WOOD MAGAZINE #77 Feb 1995 (v.12#2) pg. 15

Floor-model jewelry cabinet. An eight drawer cabinet (16"x20"x20" tall) also includes two compartments for hanging necklaces. The cabinet is then raised on 21" legs. Each of the divided storage drawers are 12"x14"x2" deep. Instructions for a companion dresser mirror also included.
WOOD MAGAZINE #82 Oct 1995 (v.12#7) pg. 48, 54

Jewelry box with beveled sides (16"x9"x4" deep) and contrasting woods. Straightforward construction procedure uses a table saw.
WOOD MAGAZINE #93 Dec 1996 (v.13#9) pg. 40
Added Info WOOD MAGAZINE #101 Dec 1997 (v.14#8) pg. 12

Brilliant boxes. Stackable-box jewelry chest (12"x6"x5" high) in an Oriental design. One long and two short boxes (with box joint corners) stack on a decorative base and are capped with a lift-off top. Boxes are colored with aniline dyes and lined with velvet.
WOOD MAGAZINE #104 Mar 1998 (v.15#2) pg. 50

A keepsake box worth keeping. Elegant jewelry box with a lift-up lid and small drawer results from simple band saw technique. Overall dimensions: 5"x6"x6" high.
WOOD MAGAZINE #121 Feb 2000 (v.17#1) pg. 74, Insert

Patina-topped jewelry box features a specially treated copper panel top with leaf patterns.
WOOD MAGAZINE #134 Aug 2001 (v.18#5) pg. 52, Insert

Keepsake box (jewelry box) features a contemporary (or Egyptian-like) design. Contrasting woods and tapered legs add to the uniqueness. Shown are (1) bird's-eye maple with bubinga, (2) lacewood with cocobolo, and (3) ash with cherry. Overall dimensions: 8"x5"x5" tall.
WOOD MAGAZINE #143 Sep 2002 (v.19#5) pg. 64

All wood jewelry box with a top that opens. Uses wooden gussets and dowel pins as hinges. Dimensions: 5"x9"x2".
WOODSMITH #9 May 1980 pg. 5

Routed jewelry box with no joints. Includes tips on making templates for use with a router.
WOODSMITH #13 Jan 1981 pg. 12

Decorative wooden box has a top fabricated from old white pine. The pine is laminated and sawn to produce a "bull's eye" pattern. The top is made first and then the box is built.
WOODSMITH #15 May 1981 pg. 13

Slide-top jewelry box utilizes the box joint (finger joint).
WOODSMITH #17 Sep 1981 pg. 14

Wooden jewelry case. Features a lift-up top and a full-length bottom drawer. Construction utilizes open mortise and tenon joints for decoration. Overall dimensions: 16" wide, 6" high, 9" deep.
WOODSMITH #24 Nov 1982 pg. 20

Jewelry box is routed out using a pin router. This results in a box that has no joints. Includes instructions for making an inexpensive pin router attachment for the WOODSMITH router table.
WOODSMITH #28 Jul-Aug 1983 pg. 10, 20

Jewelry case features an inlaid wood top. Sides are cut to the shape of a gentle parabolic cove. Overall dimensions: 12"x8"x4".
WOODSMITH #46 Aug 1986 pg. 6, 12

Making wooden band saw boxes. Suitable for use as jewelry boxes, desk accessories, etc.
WOODSMITH #51 Jun 1987 pg. 10, 14

Jewelry chest features a lift-up bent plywood top that is fabricated from poster board and veneer. Four large drawers are accessed from the front. Overall dimensions: 12"x8"x13" tall.
WOODSMITH #89 Oct 1993 (v.15) pg. 8, 14, 15

Jewelry cabinet (18"x12"x41" high). The case sits on a base with cabriole legs and scalloped aprons. L-shaped doors wrap around front and sides of the case. Brass pegs are used for hanging necklaces and nine padded drawers for small items.
WOODSMITH #106 Aug 1996 (v.18) pg. 6

Accessory or jewelry box (10"x7"x3" high) has curved sides, a figured panel, leather lining and a unique, ebonized finish.
WOODSMITH #107 Oct 1996 (v.18) pg. 28, 19

Jewelry box has veneered mahogany panels and walnut edging, applied with a three-way miter joint. It has a shallow sliding drawer inside. An alternative version is made into a cigar humidor, lined with Spanish cedar. The humidor has two dividers in the base. A humidifier and hygrometer are installed in the lid.
WOODSMITH #112 Aug 1997 (v.19) pg. 14, 19

Elegant wooden jewelry box features a raised panel top and scroll-sawn patterns in the sides. Overall dimensions: 11"x8"x6" tall.
WOODSMITH #126 Dec 1999 (v.21) pg. 26

Turned jewelry box with a hidden compartment.
WOODTURNING #38 Dec 1995-Jan 1996 pg. 63

Unique turned jewelry box features a hinged top with built-in circular mirror that opens to reveal 5 storage hollows. The top and five-compartment unit can be pivoted open to reveal a larger storage hollow in the base.
WOODTURNING #71 Jan 1999 pg. 59

Jewel of a job. Making a two-piece jewel casket is a good beginner's project. Requires two blanks of same diameter (about 6") and a piece of old leather to line the box and lid.
WOODTURNING #75 May 1999 pg. 47

Wooden jewelry box (12"x8"x6" tall) features decorative finger joints. A divided interior shelf raises up when the top is opened, thus facilitating access to the bottom storage compartment.
WOODWORK #2 Summer 1989 pg. 37

A shallow wooden jewelry box (9"x5"x2") features walnut sides, pine top and bottom, and an interior that is divided into small compartments. Tongue and groove joints are used to join the sides.
WOODWORK #26 Apr 1994 pg. 74

Betty's box. A jewelry box in an oriental style. This glass-topped vitrine has three drawers, a lidded top compartment, frame-and-panel sides and back, and decorative inlays. Overall dimensions: 18"x11"x10" tall.
WOODWORK #31 Feb 1995 pg. 58

Necklace cabinet and jewelry box (16"x9"x27" high). The base has three drawers. The top (5" deep) has pegs for necklaces and rings behind a mirrored door. Also includes modifications to the plan for making a spice cabinet.
WOODWORK #39 Jun 1996 pg. 50

A jewelry box (12"x18"x5" deep) of amaranth and ebony. Ebony is used for an insert in the top and a knob on the lid. The inside is divided into two compartments. Each side is has a sliding half-tray.
WOODWORK #45 Jun 1997 pg. 40

Necklace storage tree is turned on a wood lathe.
WOODWORKER #1017 Aug 1978 (v.82) pg. 350

Girl's treasure chest. A small wooden box (11"x7"x5") can be used as a jewelry box. The top opens up to reveal contents. Requires intricate wood joints.
WOODWORKER #1032 Nov 1979 (v.83) pg. 680

Jewelry cabinet. Each quarter of this wooden "cube" pivots out to reveal 4 small drawers. Dimensions: 200mm tall, 100mm square.
WOODWORKER #1068 Nov 1982 (v.86) pg. 760

Making an oyster-veneered jewelry box.
WOODWORKER #1090 Sep 1984 (v.88) pg. 590

A jewel of a chest. Meticulous drawings for a classical miniature chest from 18th-century Holland.
WOODWORKER #1097 Apr 1985 (v.89) pg. 291

Detailed drawings for a 17th century Dutch jewel cabinet. Overall dimensions: 520mm long, 310mm deep, 280mm tall (20"x12"x11").
WOODWORKER #1114 Sep 1986 (v.90#9) pg. 714

Beautiful little chest features six drawers and four different hardwoods. The drawers are concealed behind a convex (coopered) door. Overall dimensions: 354mm tall, 247mm wide, 203mm deep (14"x10"x8").
WOODWORKER Mar 1987 (v.91#3) pg. 242

Jewelry box features hand-cut dovetailed corners and a raised panel in the lift-up top. Overall dimensions: 14"x10"x4" deep.
WOODWORKER Apr 1991 (v.95#4) pg. 372

Chevron cubes. A parquetry pattern of zigzags decorates a cube-like container which holds three wooden trays suitable for the storage of trinkets.
WOODWORKER Jul 1991 (v.95#7) pg. 712

Jewelry box is fabricated from wood in the shape of a small chest (6"x9"x6" tall). Two removable compartmented tray inserts float down on a cushion of air when dropped in place. The box is decorated with marquetry basket weave.
WOODWORKER Oct 1991 (v.95#10) pg. 1018

Reproduction of a trinket chest (a small 4-drawer chest of drawers suitable for storing jewelry, etc.). Overall dimensions: 15" wide, 15" tall, 8" deep.
WOODWORKER Sep 1994 (v.98#9) pg. 52

Miniature 3 drawer chest with lift-up top. Measures 11"x5"x8".
WOODWORKER'S JOURNAL Nov-Dec 1977 (v.1#6) pg. 7

Inlaid spool chest. A small chest (8" tall, 10" deep and 11" wide) has three drawers. Each drawer holds several spools of thread. The top of the chest is decorated with an inlaid wood flower. Suitable for use as a jewelry box.
WOODWORKER'S JOURNAL Jul-Aug 1979 (v.3#4) pg. 15

Shield-shape vanity mirror is supported by two curved arms mounted on a jewelry box base with 3 small drawers. Mirror tilts to correct angle.
WOODWORKER'S JOURNAL Jan-Feb 1981 (v.5#1) pg. 18

Musical jewelry box looks like a miniature trunk and features a curved lid shaped like half a cylinder. Dimensions: 12" long, 6" wide and 7" tall.
WOODWORKER'S JOURNAL Sep-Oct 1981 (v.5#5) pg. 22

Spalted wood boxes. How to cut your own slices of spalted (partially rotted) wood which is highly decorative and incorporate it into wooden boxes.
WOODWORKER'S JOURNAL Sep-Oct 1981 (v.5#5) pg. 28

Vanity case. A wooden jewelry box (12"x14"x4" deep) with a lift-up top. The top includes a mirror which pivots out and can be adjusted at various angles for use when putting on the jewelry. The box is divided into nine compartments
WOODWORKER'S JOURNAL Sep-Oct 1986 (v.10#5) pg. 37

Jewelry boxes combine simple design with elegant woods and subtle details. Overall dimensions: 12" long, 8" wide, 3" deep.
WOODWORKER'S JOURNAL Jan-Feb 1987 (v.11#1) pg. 46

Vanity mirror with drawer. Dresser top box with one drawer includes an attached adjustable mirror in a circular frame. Combines basic wood turning with a simple band saw box technique.
WOODWORKER'S JOURNAL Jul-Aug 1987 (v.11#4) pg. 46

Three-drawer jewelry chest made from decorative wood. Overall dimensions: 16" long, 8" deep, 8" tall.
WOODWORKER'S JOURNAL Nov-Dec 1987 (v.11#6) pg. 40

Classic jewelry box features ogee bracket feet, dovetailed corners and delicate Chippendale hardware. Overall dimensions: 13"x8"x6" tall.
WOODWORKER'S JOURNAL May-Jun 1989 (v.13#3) pg. 26

Uniquely-shaped jewelry box is made from exotic woods to achieve a "gemlike" appearance. Laminating, banding and visible corner splines add to the decoration. Overall dimensions: 14"x9"x4" tall.
WOODWORKER'S JOURNAL Nov-Dec 1989 (v.13#6) pg. 42

Tabletop armoire is suitable for use as a curio cabinet or a jewelry chest. Features a "tombstone" frame-and-panel door and a single drawer. Overall dimensions: 21" tall, 14" wide, 7" deep.
WOODWORKER'S JOURNAL May-Jun 1990 (v.14#3) pg. 57

Contemporary jewelry box made from koa wood. Uses a unique modular drawer system that lets you add more drawers as needed. Overall dimensions: 18"x9"x5" tall.
WOODWORKER'S JOURNAL Nov-Dec 1990 (v.14#6) pg. 45

Octagonal jewelry box is made of wood. It features geometric-pattern wood inlay and a wooden hinge for the top. Overall dimensions: 9" across and 4" tall.
WOODWORKER'S JOURNAL Mar-Apr 1991 (v.15#2) pg. 62, 38

Keepsake jewelry box. Wooden box is constructed using the traditional half-blind dovetail joint. The top lifts up to reveal a sliding/removable tray for earrings and compartments for larger items. A music box movement is incorporated into the box and is visible through a plastic window. Overall dimensions: 12"x6"x4" tall.
WOODWORKER'S JOURNAL Nov-Dec 1991 (v.15#6) pg. 53

Heirloom jewelry box. A basic mitered-corner box, reinforced with splines in a contrasting wood, is built from cocobolo and bird's-eye maple, with ebony accents. It features a sliding/lift out tray and a wooden hinge for the top. Overall dimensions: 10"x5"x3" deep.
WOODWORKER'S JOURNAL Nov-Dec 1992 (v.16#6) pg. 56

Jewelry case uses a Greco-Roman theme, evoking an image of the Parthenon and similar classical structures. A three-drawer chest is fitted into a case consisting of a mosaic "floor" and roof separated by four turned columns. Overall dimensions: 10"x5"x7" tall.
WOODWORKER'S JOURNAL May-Jun 1993 (v.17#3) pg. 42

Contemporary jewelry box. Features bird's-eye maple with padauk accents. Coves accent the sides and the inset lid is hinged on dowels. Overall dimensions: 15"x9"x4" deep.
WOODWORKER'S JOURNAL Nov-Dec 1993 (v.17#6) pg. 53

Miniature jewelry armoire. A traditional wooden jewel box with decorative veneer top is mount on-end on a base. When opened, there is provision for hanging earrings, necklaces, etc.
WOODWORKER'S JOURNAL Nov-Dec 1994 (v.18#6) pg. 46

Keeping chest. This small, portable "Chippendale-style" chest features hand-cut dovetails, a lift top, and a removable tray. Use as a jewelry box, collectors box, etc. Overall dimensions: 13"Lx7"Wx7"T.
WOODWORKER'S JOURNAL Mar-Apr 1995 (v.19#2) pg. 22

Jewelry box (10"x16"x6" high) is made from cherry, curly maple and walnut. It has a raised panel lid with mother-of-pearl inlay, brass pedestal feet, an escutcheon-style lock and a 30-segment tray.
WOODWORKER'S JOURNAL Mar-Apr 1996 (v.20#2) pg. 54

Jewelry box (made from old lumber salvaged from Lake Superior) is decorated with a rose motif intarsia on the top. This fairly-simple box features a removable shallow tray, a drawer in the bottom, and a mirror on the inside of the hinged top. Overall dimensions: 8"x13"x7" tall.
WOODWORKER'S JOURNAL Sep-Oct 1998 (v.22#5) pg. 36, Insert

Turned jewelry box (round box) is decorated with an etched mirror set into the fitted lid.
WOODWORKER'S JOURNAL May-Jun 1999 (v.23#3) pg. 43

Tip shows how to make a jewelry case for traveling.
WORKBASKET Sep 1978 (v.43#12) pg. 23

Tip on how to decorate oil cans with painted designs for use as ring holders.
WORKBASKET Oct 1978 (v.44#1) pg. 20

Table-top chest, 5"x10", is made from wood and aluminum angle.
WORKBENCH May-Jun 1965 (v.21#3) pg. 56

Necklace cabinet. Each string of beads has its own hook on a rotating disk. Any string is easily removed through the tall door on this 13-1/2" high cabinet.
WORKBENCH Mar-Apr 1966 (v.22#2) pg. 10

A jewel box in the shape of a Swiss chalet features a built-in music box.
WORKBENCH Sep-Oct 1969 (v.25#5) pg. 58

Sectional jewelry box.
WORKBENCH Jul-Aug 1971 (v.27#4) pg. 56

How to construct and decoupage a jewel chest that is a reproduction of an 1850's chest.
WORKBENCH Sep-Oct 1972 (v.28#5) pg. 52

Tiny treasure chest, 5"x10"x6" deep, is built from pine with strips of self-adhesive teak veneer for decorative banding.
WORKBENCH Sep-Oct 1973 (v.29#5) pg. 47

Oriental jewelry chest uses a design that suggests a pagoda roof. Chest has fourteen drawers and is 24" wide, 16" tall and 12" deep.
WORKBENCH Nov-Dec 1973 (v.29#6) pg. 48

Getting started with plastic laminates. Cutting, cementing and edging instructions. Pattern for a jewelry box included for a first project.
WORKBENCH Sep-Oct 1976 (v.32#5) pg. 46

A charming doll house is really a jewelry box. Four jewelry drawers are installed in the rear opening of this Victorian style doll house. Overall dimensions are 12" tall, 11" deep and 16" wide. It is mounted on a lazy-susan bearing to make it easy to turn around.
WORKBENCH Jan-Feb 1979 (v.35#1) pg. 112

Wooden jewelry box with a lift-up top is decorated with needlework panel in the top. Dimensions: 11" long, 7" wide, 4" deep.
WORKBENCH Nov-Dec 1981 (v.37#6) pg. 35

Heart shape jewelry box cut from cedar.
WORKBENCH Jul-Aug 1982 (v.38#4) pg. 80

Jewel chest has three drawers which are concealed behind a tambour door. Overall dimensions: 9" wide, 8" tall, 6" deep.
WORKBENCH May-Jun 1983 (v.39#3) pg. 104

Beautiful jewelry box is made from redwood burl. Four drawers with removable partitions hold the jewelry. A musical movement is activated when the top drawer is opened. Dimensions: 12" wide, 12" tall, 8" deep.
WORKBENCH Nov-Dec 1983 (v.39#6) pg. 8
Correction WORKBENCH Jul-Aug 1984 (v.40#4) pg. 21

Small storage box features a domed display top and early American styling. Built of wood. Suitable for use as a jewelry box, keepsake box, etc.
WORKBENCH Mar-Apr 1987 (v.43#2) pg. 60

Jewelry cases. (1) Carved mahogany chest. Lift top reveals a mirror and 6 small storage compartments. A drawer in the base has 6 more compartments. Overall dimensions: 13"x10"x6". (2) Simple oak box with 5 small drawers and a tip-out ring holder. Overall dimensions: 6"x17"x6".
WORKBENCH Nov-Dec 1987 (v.43#6) pg. 39

Elegant jewelry boxes made from wood. Corner joints feature a half-blind-tongue-and-dado joint.
WORKBENCH Nov-Dec 1989 (v.45#6) pg. 48

Cherry jewelry box features uniquely organized interior trays and partitions, exposed finger joints at the corners, and decorative feet. Overall dimensions: 10"x16"x5" tall.
WORKBENCH Nov-Dec 1990 (v.46#6) pg. 40