|
 |
 |
 |
|
 |
|
 |
|
|
Last Updated
03/31/2019
Sitemap
|
|||||||||
Detailed entries for one subject from the INDEX TO HOW TO DO IT INFORMATION. |
|||||||||
|
FRAME & PANEL CONSTRUCTION sa FRAME & PANEL DOOR sa PANEL & PANELING x RAISED-PANEL CONSTRUCTION xx PANEL & PANELING xx SAWING Cutting raised panels on a table saw. This panel-raising jig rides on the saw fence. Mitered sticking. A time-honored frame-and-panel construction technique you can do on your table saw. Panel raising bits. Advice on the selection and use of the two styles of router bits (horizontal or vertical) which cut professional-looking profiles on panel edges. Table saw production of frame-and-panel assemblies. Includes instructions for making a panel-raising jig and a duplicate parts jig. Raise panels safely using your router table. Build three fixtures that will give you more control and protection. (1) Box fence for horizontal bits features built-in dust collector. (2) Tall fence for vertical bits features built-in dust collector. (3) Pivot arm router table holds vertical bits horizontally for easier use. Also has built-in dust collector. Coved doors on the table saw. Make beautiful raised panels with the traditional scooped-out profile without a router table and expensive bits. Frame-and-panel construction technique uses floating tenons which are easy to make. A bearing-equipped wing-cutter router bit is used to cut the panel grooves in the rails and stiles. Building a raised cushion panel with a minimum of tools. Alternative method for cutting raised panels on a table saw involves running the panels sideways through the saw. Traditional cabinetry from a modern material. How to make paint-grade raised-panel assemblies from MDF (medium-density fiberboard). The frame and panel system of construction. A consideration of proportion and pattern, plus fabrication of the frame and panel. How to cut raised panels with a router. How to produce panels with long-tapered bevels on your jointer. Make fluted panels on the table saw using a simple angled fence. Panel-raising by hand. Using hand tools to construct panel-and-frame assemblies for architectural woodwork and furniture. Fixture to expedite making 1/2"-thick beveled panels on a table saw. Adjustable fixture for beveling panels with a router. Beveled ramp facilitates the cutting of raised panels on the jointer and is much easier and safer than other methods. Frame-and-panel carcases. A classic solution for sound construction. Basic dimensions for a double cabinet and a blanket chest are also shown. Tip on using the table saw to cut a groove to accept a plywood panel. Machining raised panels. Topics covered include table sawn panels, router- or shaper-cut panels, panel design, fitting the panel to frame, and beveling panels by hand. Where rail meets stile. How to machine or apply traditional mitered sticking (decorative molding) around the inside of the frame on a frame-and-panel assembly. How to cut concave bevels on a raised panel using a table saw fitted with a dado head and an auxiliary fence. Tip on using a band saw to remove most of the waste before profiling the edge of a raised panel on a shaper. Special dado and table saw blade techniques to make pierced panels, carved surface panels, double spirals, etc. Bench-saw know-how. Part 4. Making raised panels, kerfing, compound cutting, faceting, and pattern sawing. Tips on fitting a panel into a tight groove. Make raised paneling on a circular table saw with two cuts. Raised panel construction. The emphasis is on using hand methods, including a panel plane, raising plane, and badger plane. How to make raised panels with a table saw. Frame-and-panel assembly using the stub tenon and groove method. Raised panel jig. Use a router, an ordinary straight bit, and this simple jig to route both rectangular and curved raised panels. Jig for using vertical raised panel bits incorporates an 8" tall fence, vacuum pickup and a pair of featherboards. Jig for assembling frame-and-panel panels so they are perfectly square. Basic raised-panel construction techniques. Make raised panels with only your table saw. How to create cabinet panels that match each other in a cathedral or "V" pattern. Low-cost way to make raised panels on a router table requires only a straight bit and a simple jig. Tall router-table fence with guide bar supports work pieces when they are stood on edge, such as when cutting panels with vertical panel-raising bits. Texas-size table saw fence. An extra-tall auxiliary fence is useful when cutting raised panels in the upright position. Plunge-routing basics and six jigs. (1) Mortising jig. (2) Fluting, slot and dado routing jig. (3) Keyhole-routing jig. (4) Jig to bore a series of identically-spaced holes. (5) Jig for making raised panels. (6) Circle-cutting trammel and template for routing holes up to 6" diameter. Raised panels. Designing and building beautiful doors and bulkheads for boats. How to do frame and panel construction, a common application of the mortise and tenon joint. Easy jig for cutting raised panels on a table saw. Frame and panel construction techniques which utilize solid-wood frames and plywood panels. This allows the use of shorter (stub) tenons without sacrificing strength. Cutting an arched top raised panel on a table saw. Raised panel cutting. (1) Table saw method. (2) Router table method. Tip: Use self-sticking foam insulation tape in grooves of frames to keep undersized panels from rattling. Making and using a simple "rub arm" or fence which allows arched raised panels to be cut on a router table using less-expensive bits. Frame-and-panel construction using the stub tenon and groove technique. Shop made base for a router is used to lightly chamfer the inside edges of an assembled frame-and-panel unit. A tall, angled fence is used with a router table to cut raised panels with a straight bit. Making the double groove frame-and-panel joint. Cutting solid-wood raised panels on the table saw. Technique for determining the exact length of each side of a mitered frame to fit around a panel. Saddle jig fits over and slides along a table saw rip fence. Ideal for clamping to when cutting the edges of raised panels. How to create an interlocking double groove joint for frame-and-panel construction. Tip on preventing raised panels from rattling around in their frames, expecially during dry seasons. Jig for routing stopped chamfers on the inside edges of frames in frame-and-panel construction. Raising a panel by hand. Cutting a raised or fielded panel by hand using a rabbet plane. Getting the correct angle is facilitated by pre-cutting field lines and lip lines to the correct depth. The craft of cabinetmaking. Essential techniques of frame-and-paneling is discussed. Jig for bevelling and fielding panels with a router. Raised panel construction. How to reduce the tendency of solid-wood raised panels to warp. Alternative joints for attaching raised panels. Reflections on glass. Part 1. Techniques for fitting and securing glass panels (clear or mirror) into rebated frames. Reflections on glass. Part 2. Making scratch tools for the production of glazing beads. Frame and panel joint with decorative bevel is a variation on the mortise and haunched tenon joint. Use a small dowel to anchor the top and bottom centerpoints of floating panels in frame-and-panel construction. Making the mitered bead frame and panel. Making a cove-edged raised panel using the core-box bit method. Panel retainer disk system. Attractive wooden disks and short screws are used to retain panels within a frame. Ideally suited for holding a mirror in a frame, a bulletin board in a frame, a panel in a frame, etc. Tip on cutting raised panels on a table saw so that the stock is kept flat and at right angles throughout the cut. The frame and panel. How to fabricate the frame using morsise-and-tenon joints and install the panel. Details for making a grooved frame and panel, and a rabbeted frame and panel. How to make raised panels with a 1" cove cutter in a molding head on a table saw. Forming raised panels on a table saw. Stub tenon and grove joinery. A joinery technique to use in frame-and-panel construction as an alternative to a full mortise-and-tenon joint. | |||||||||
Copyright © by Norman Lathrop Enterprises. All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, print photocopying, recording or otherwise) without the prior expressed permission of Norman Lathrop Enterprises, except as permitted by law. |
|||||||||