|
 |
 |
 |
|
 |
|
 |
|
|
Last Updated
03/31/2019
Sitemap
|
|||||||||
Detailed entries for one subject from the INDEX TO HOW TO DO IT INFORMATION. |
|||||||||
|
FRAME & PANEL DOOR sa FRENCH DOOR x RAIL & STILE DOOR x STILE & RAIL DOOR xx DOOR xx FRAME & PANEL CONSTRUCTION xx FURNITURE DOOR How to tool sheets of copper and mount them in door panels. Building frame and panel doors. A primer on one of the basics of the cabinetmaker's craft. Tips on constructing a weather-tight frame-and-panel door for exterior applications. Easy entry door. Full-size exterior frame-and-panel door uses multiple biscuit joints (instead of mortise-and-tenon joints) to build the frame. Choices for cabinet doors. Five basic constructions that fit any style of case (solid wood frame with solid wood panel, solid wood frame with thin panel, flat door, flat panel with solid wood frame, and board-and-batten door. No-fuss frame-and-panel cabinet doors and drawer front are created with rabbeting and applied molding. Coopering a frame-and-panel door. An easy way to make curved panels from strips of solid wood. Veneered raised-panel doors. Includes instructions for making and using a table saw raised-panel jig. Making tombstone (arched-top) frame-and-panel cabinet doors. Stile and rail joinery on your router table. Using a reversible stile and rail cutter to make perfect-fitting frames for doors and cabinets without dowels, mortises or biscuits. Making raised-panel doors on the router table. A pull-out shop guide that is a reprint of an April 2001 article. Straightening curved stock. How to repair a warped stile on a frame-and-panel door by resawing and laminating. Diagrams show the "pioneer" method and a modified method for holding the panels in frame and panel cabinet doors. Frame-and-panel cabinet door construction. How to make raised panel interior doors. Basic instructions for making a one-panel and two-panel frame-and-panel cabinet door. Build a full-size (72" tall) round-top frame-and-panel passage door and matching door frame. Tip on repairing separation of rails and stiles on panel doors. Tip on straightening a bowed stile on an oak door. Curved doors. How to fabricate curved frame-and-panel doors for use on cabinets, closets, etc. An elegant site-built door. Build a custom interior or exterior frame-and-panel door with common job-site tools and readily available materials. Making frame-and-panel cabinet doors using router bits. Tips on constructing raised-panel doors (frame-and-panel doors) which will minimize any problems or movement caused by moisture. How to make a raised panel door using only a table saw and a chisel. Entry doors. How to construct frame-and-panel entry (exterior) doors. A look at construction, design and glass considerations. Paneled doors and walls. Colonial workmen relied on the right wood planes to shape the profiles on panels, rails and stiles. A review of the planes and the techniques used. Variations on the frame and panel. Illustrations of contemporary decorative doors which contain few or many pieces, and combine both machine and hand methods. Tip: How to fabricate raised panel doors with S-curved (cyma curved) panels. Hand-made wooden planes are used to plane the bevel and shoulder on raised panel doors. A jig for a radial arm saw to cut raised panels for frame-and-panel cabinet doors. A decorative joint for the frame is also noted. How to make panels from plywood and veneer described. Tips on the correct fit between frame and panel in raised-panel doors. Building traditional, fullsize, frame-and-panel doors. Fancy raised panels feature shaped edges (ogee, arched, serpentine, etc.). Hand-carving is used to shape the hollows and rounds after machines are used to remove as much waste as possible. Tips on using a router to make raised-panel doors. Comparison of solid-vs.-laminated 8/4 stock for use as rails, stiles and panels for household doors. Making period doors. Building frame-and-panel entry and passage doors. Designs for Georgian (1720-1790), Federal (1780-1820), and Greek Revival (1820-1860) are shown. Table saw jig for making steep angled cuts on the edges of long work pieces (as when making fielded panel doors) straddles the rip fence. Tips on shaping curved rails and panels for raised-panel doors. Cabinet door frames. Machine methods for strong construction of the frames for traditionalframe-and-panel cabinet doors. Advice on making solid-wood, raised-panel exterior doors that can better withstand wood movement. Simple frame-and-panel cabinet door is dressed up by applying shop made quirk-and-bead molding around the inside edges of the rails and stiles. Special clamping jig to use when gluing up small paneled doors. Doors make the difference. Five door options for simple cabinets. (1) Frame and glass-panel. (2) Frame and flat-panel. (3) Frame and hand-carved panels. (4) Vertical center stile. (5) Carved flush panels with center stile. Frame-and-panel door construction trick uses a spline to guide the installation of the moldings around the inside of the frame. Making frames with molded edges for glazed or raised-panel doors using a router. What is available in cope-and-stick router bit sets. Choosing the strongest joinery for full-size frame-and-panel door frames. A comparison of bolted, doweled, tongue-and-groove, loose tenon, mortise-and-tenon, and biscuit joints. Making full-sized frame-and-panel passage doors. A combination of machine and handwork makes a tightly coped joint where rail meets stile without the need for expensive tooling. Tip to avoid end-grain tearout when jointing the top and bottom edges of frame-and-panel cabinet doors. An illustrated guide to frame-and-panel cabinet doors. Looks at basic structure, joinery options, panel variations, panel design, etc. Build a houseful of doors. How to measure, construct and install simple frame-and-panel doors to fit existing openings in a Tudor cottage. The V-grooved panel is assembled from 1x4 stock. The rails and stiles are 8/4 and use #20 biscuit joints instead of mortise-and-tenon joints. Three ways to make cabinet doors. (1) Frames for solid-wood panels. (2) Frames for glass panels. (3) Fast frames for plywood panels. Arched top cabinet doors. Make arched raised-panel (frame-and-panel) doors of any size using this adjustable jig and a router. Making a double-tenon bridle joint for frame-and-panel door frames. Tip: Use old, four-panel wooden doors, cut in half, as sides for new furniture, such as book cases, cabinets, etc. Panel-making the old-time way. Using hand tools to build frame-and-panel doors. Five low-cost decorating ideas. (1) Create a paneled look with molding. (2) Make wood look like marble. (3) Build an eye-catching cornice treatment. (4) Build homemade panel doors for your cabinets. The removable panels can be wallpapered, wrapped, or painted to match room decor. (5) Add mirrors to stair risers to create the illusion of no risers at all. This trick visually enlarges small foyers. Tips on carving decorative panels for panel doors. Careful attention to the design and balance are discussed. Other uses for panel doors. Making a frame-and-panel door, a traditional four-panel, flat-panel version. Panel door construction using a table saw. Clamping jig (consisting of a plywood back and two cleats at 90-degrees) provides an accurate reference when squaring and clamping frame-and-panel doors. How to make a hand-crafted, full-size, raised-panel door. Requires a table saw, router, sander and some hand tools. Raised door panels cut with a rotary planer. Building raised panel doors like a pro using a router table and three special bits. Stile and rail bits for use in a table-mounted router explained. Jig and clamping system for gluing up a frame-and-panel door. How to build several versions of raised panels. (1) Rectangular panels with rabbeted or routed backs. (2) Cope-and-stick joinery. (3) Raising panels with router bits. (4) Arched-top panels and frames. Make your own full-size rail-and-stile interior doors. Step-by-step instructions. Rail-and-stile router bits (also known as stile-and-rail, cope-and-stick, or cope-and-pattern bits). Advice on selection and use of these bits to make traditional-style frame-and-panel doors. Technique for squaring up a cabinet door frame. A new way to make raised-panel cabinet doors by applying a plywood panel overlay framed with molding. How to use the table saw to increase the depth of just the mortise area when building frame-and-panel doors in order to accept longer tenons and improve the corner strength. Easy and quick cope and stick. Use a basic router bit in a new way to dress up those frame-and-panel cabinet doors. Panel-door glue-up jig uses wedges and requires no clamps. Raised-panel furniture doors made easy. Using two special router bits to make the door frame and one special bit to make the panel. How to make raised panel doors. Two methods for cutting the panel are shown (saw blade method and molding head method). The frame uses mitered half-lap joints at the corner and a dado joint to accept the edge of the panel. How to make frame-and-panel glazed doors (glass doors) for a hutch or other cabinet. Includes tips for making muntins, stops, and installing concealed hinges. Step-by-step instructions for cutting the haunched mortise and tenon. This joint is ideal for raised-panel doors. Building raised panel doors. Tip: Consideration must be given to grain when making raised panels. How to cut a decorative stopped chamfer on the inside edge of an assembled frame-and-panel door using a router and this simple jig. Tip on keeping a free-floating raised panel centered in a frame-and-panel door. Tip on straightening slightly-warped furniture doors, especially the frame-and-panel style. Designing and building a raised-panel entry door that combine large mortises and tenons in the frame with panels that can expand and contract without affecting the weatherproof seal. Making the stub tenon and groove joint. This variation of the mortise-and-tenon joint is ideal for small frame-and-panel doors. Molded stub tenon joint is used to join frame pieces (stiles and rails) together on a paneled door. Includes instructions for machining the "built-in" molded edge directly on the door frame. Tip on pre-drilling holes through the stops which will hold glass panels in frame-and-panel doors. Making full-size frame-and-panel doors, also known as stile-and-rail doors. Steps in making glazed frame-and-panel doors. Jig and technique for cutting door panels on a table saw. These panels are of the type used in frame-and-panel doors. Tips on making a raised or fielded panel for a door which has a molding finishing directly on the face of the panel. Step-by-step instructions on how to make a frame-and-panel door for a kitchen cabinet. Tips on correcting a warped frame-and-panel door in an antique cabinet. Door wise. Traditional approach to constructing a hardwood frame-and-panel front door and tricks of the trade for hanging it. A definitely different front door. Herringbone pattern is laminated from wood before cutting the large raised panels. Frame and panel construction. How to layout, cut and assemble frame and panel doors which will withstand expansion and contraction for many years. Tip: Rip a slot in the edge of door panels in order to avoid splitting the rail or stile. Making a raised arched panel for a frame and panel cabinet door. Making frame-and-panel cabinet doors which feature symmetrical grain patterns (mirror-image panels). Tip on considering the season of the year when making wooden panels for frame-and-panel doors. Making an arched profile (tombstone style) frame-and-panel door. Selecting, adjusting and using a stick-and-cope or stile-and-rail set of router bits to make frame-and-panel doors for furniture. Classic mahogany entry door. Loose-tenon construction used to hold the lower raised panels and the etched glass window panels. How to make a template and template guide to make arched raised panels for cabinet doors. Allows you to make the panels using a table saw with a molding head. Cope and stick joints. How to make frame-and-panel doors. | |||||||||
Copyright © by Norman Lathrop Enterprises. All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, print photocopying, recording or otherwise) without the prior expressed permission of Norman Lathrop Enterprises, except as permitted by law. |
|||||||||