Added Info FINE HOMEBUILDING #93 Feb-Mar 1995 pg. 6
Tip on using a larger pilot dowel on a hole saw when redrilling existing doors for new locksets.
FINE HOMEBUILDING #111 Aug-Sep 1997 pg. 32
Tip on modifying a coffee can to cut neat circles in foam-board insulation.
FINE HOMEBUILDING #115 Apr-May 1998 pg. 30
Tip on recycling a broken golf-club shaft into a punch (for cutting small circles of leather, etc.) or into a small-diameter hole saw.
FINE WOODWORKING #112 May-Jun 1995 pg. 18
Boring big holes. When to use Forstners, Multispurs, spades, hole saws, and wing cutters.
FINE WOODWORKING #129 Mar-Apr 1998 pg. 44
A look at saws for cutting curves and holes. Covers the compass saw, keyhole saw, coping saw, saber saw and hole saw.
HANDY ANDY May 1979 (v.3#8) pg. 88
A look at hole saws, the sizes available and how to use them.
HOMEOWNERS HOW TO #5 Spring 1977 (v.2#1) pg. 126
How to convert mild steel core drills into diamond charged core drills for drilling large holes in rock.
LAPIDARY JOURNAL Apr 1982 (v.36#1) pg. 235
Tip shows how to support a hole saw pilot bit when cutting a larger hole for a replacement door lock.
OLD-HOUSE JOURNAL Nov-Dec 1998 (v.26#6) pg. 80
Make an edge-rounding tool from a hole saw.
POPULAR MECHANICS Feb 1970 (v.133#2) pg. 185
Tip on cutting solid wood rings using a multiple-blade hole saw and an electric drill.
POPULAR MECHANICS Feb 1984 (v.161#2) pg. 134
Tip on drilling a sawdust relief hole in the waste portion when using a hole saw.
SHOPNOTES #15 May 1994 (v.3) pg. 28
Tip on converting used circular hole cutters into circular cutters for making large gaskets.
SKINNED KNUCKLES #224 Mar 1995 (v.19#8) pg. 26
Custom-size hole saw is made from band saw blade material attached to a wooden disk.
SPORT AVIATION Jul 1993 (v.42#7) pg. 96
How to ease the strain on a drill when cutting a large-diameter hole through a thick work piece using a hole saw.
TODAY'S HOMEOWNER #815 May 1997 (v.93) pg. 29
Tip on providing continuous lubrication when hole-sawing through metal.
TODAY'S HOMEOWNER #819 Oct 1997 (v.93) pg. 25
Tip on using two hole saws (mounted on the same arbor) to enlarge a lockset hole.
TODAY'S HOMEOWNER #822 Feb 1998 (v.94) pg. 27
Shop built "grabber" helps remove a stuck wooden plug from inside a hole saw.
WOOD MAGAZINE #88 Jun 1996 (v.13#4) pg. 24
Positioning holesaw near edge of the stock ends sawdust clogging problem.
WOOD MAGAZINE #99 Oct 1997 (v.14#6) pg. 20
Tip on using sharpened brass tubing to cut perfect holes in soft wood, like balsa.
WOOD MAGAZINE #121 Feb 2000 (v.17#1) pg. 6
Hints for huge holes. Tools and techniques for boring and routing large holes.
WOOD MAGAZINE #122 Mar 2000 (v.17#2) pg. 34
Added Info WOOD MAGAZINE #131 Mar 2001 (v.18#2) pg. 10
Method to speed up removal of the waste plug when using a hole saw.
WOOD MAGAZINE #132 Apr 2001 (v.18#3) pg. 39
How to accurately enlarge a hole (in wood) of almost any shape or size using two router bits.
WOOD MAGAZINE #149 Jun-Jul 2003 (v.20#3) pg. 24
Technique for enlarging a hole to almost any diameter using a router and two bits.
WOODSMITH #74 Apr 1991 pg. 4
Technique to prevent the bit from burning the wood when using a hole saw.
WOODSMITH #126 Dec 1999 (v.21) pg. 5
Tip on making and using a hand-held coring saw (hole saw) to cut plugs out of the center of ivory napkin rings.
WOODTURNING #24 Jul-Aug 1994 pg. 16
Tip on making a "nut-cracker" style of wrench to remove the wooden plug from a hole saw.
WOODWORK #33 Jun 1995 pg. 10
Make custom-diameter hole saws from pieces of band saw blade wrapped around a hardwood body.
WOODWORKER Nov 1991 (v.95#11) pg. 1181
Technique for hole-sawing laminates without overheating the saw.
WOODWORKER'S JOURNAL Jul-Aug 1996 (v.20#4) pg. 6
Tip: Improve hole saw performance by applying a heavy rubber band around the outside.
WORKBENCH May-Jun 1986 (v.42#3) pg. 80
Tip on using grease and wax to make hole saws easier to use.
WORKBENCH Apr-May 1994 (v.50#2) pg. 40